 |
ATA66 and ATA100/133 are the
newest standard for IDE drives. Up until now, IDE drives have
been limited in their speeds due to noise and crosstalk of the
normal 40 pin cables.
The ultra ATA has 80 wire conductors
and 40 pins, the extra wires help make the new ATA66 and ATA100
hard drives perform like SCSI drives (reduces cross-talk, improves
signal integrity). All pins straight from 1 to 1, 2 to 2 and so
on. Line 34 on the cable should be notched or cut (this may be
difficult to see).
It is used between one ATA66/100 PCI controller
card and up to two storage devices.
To support UDMA66/100/133 hard drives, ATA66/100 cable should
be installed by connecting the BLUE connector onto the motherboard,
BLACK connector to the Master hard drive and GREY connector
to the Slave hard drive.
|
| |
|
SPECIFICATION IDC CONNECTOR |
| |
--Connector type: IDC SOCKET 40PIN CONNECTOR
(80C)
--Contact No.: 68, 80
--Contact material: copper alloy
--Insulator material: PBT & glass-fiber
--Contact resistance: 30Mohm maximum 0.3A
--Insulator resistance: 1000Mohm minimum 500VDC
--Dielectric withstanding voltage: 500VAC/minute
--Operating temperature: -40C to +150C
--Insulator Color: Blue, Grey & Black |
|
CABLE |
| |
--PVC(ATA66) or TPO(ATA100) OR TPE(ATA133) Jacket,
80 Conductors
--Cable Pitch: 0.635mm (stranded type)
--Transfer rate: 66MB/SEC for ATA-66, 100MB/SEC for ATA-100
--Length & Distance in accordance with your specifications
--OEM & ODM order is welcomed
|
|
|
|
| ATA-66 FLAT CABLE |
ATA-100 FLAT CABLE 3 IDE CONNECTOR |
|
|
|
| ATA-133 FLAT CABLE 3 IDE CONNECTOR |
ATA FLAT CABLE WITH PULL WIR |
|
